Products > Displays > StarLight15X



 
At the development of the Nickl StarLight series all experiences made with the SunLight series are collected. Then the main features of them are inherited in order to offer a very cost-effective display.

In that way, the largest model StarLight15X was developed for cost-sensitive applications. It offers all what is neccesary to work effectively in the research and development on an automobile. For example its resolution of 1024 x 768 dots allows working with graphical user interfaces and its high brightness of 400 cd/m² eases reading the display content. Even mixed application with PC graphics and camera is possible because the user can select between the inputs.

Its very compact outer dimensions and the available accessories ease the integration on most places and a direct connection to the automotive mains eliminates the need of a DC/DC converter.
Particular features
  • Zooming (interpolated) for all resolutions lower than XGA (1024 x 768)
  • Shrink (interpolated) for all resolutions higher than XGA up to UXGA (1600 x 1200)
  • Two brightness levels via external signal switchable
  • Wide Supply voltage range 9..36 V
  • S-Video inputs for PAL, NTSC and SECAM
Applications
  • Research and development of automobile applications
Order Data: 1EMST15X

The Interface

Start immediately by being independent of the operating system or other customized solutions. The analogue input or a DVI input enables you to work under almost all operating systems since you do not need a specific driver for a proprietary graphics interface and you do not need a specific BIOS version to see your computer booting.


The Power Supply

Directly connect to the battery of your car or aeroplane. The built-in power supply offers a wide input supply range of 9..36V in most of the cases. In addition, you are released from ground-loops since the power supply of the SunLight and RuggedLight series is galvanically decoupled.


The >>display-lens<<

In most cases, a relatively high resolution is desired for a display, but for this the display is mostly large and less integrable. A smart solution here is the unique >>display magnifier<< which is possible by setting via the display menu and activated with a display key combination.

With its electronic "display-lens" it is possible to get any display window with any user-defined magnification. Once only adjusted, then easily can be toggled with the two push-buttons "Enter + Adjust" from the original frame to the adjusted "lens" window, and vice verca.

HANDLING: push the Enter-button first and keep pushed, direct after it push the Adjust-button additionally