Vacuum cup bridge PI-120

Is a simple, short-term installation desired, the vacuum cups are used. There must be no holes drilled. You can on smooth and non-porous surfaces such as the windshield can be attached. The rubber vacuum pads soiled or damaged most surfaces. On the holder bridge our ball joints can be rotationally mounted. The black anodized aluminum milled part provides optimum stability with low weight. The two legs can be adjusted so that the suction cups can adapt to the curvature of the windshield
A red warning ring indicator alerts the user when a significant loss of vacuum. A check valve allows the re-inflation without loss of remaining vacuum. Release tabs on the vacuum pads-edges permit instant release.
The bridge allows holders constructions with one of our ball joints and thus gives a maximum load capacity.

Particular features

Flexible solution which can be re-used in many projects
Torsion stiffness with grub screw
For mobile use with TFT Displaysize > 10 Zoll
Solid structure with weight reduction
A red warning ring indicator alerts the user when a significant loss of vacuum.
A check valve allows the re-inflation without loss of remaining vacuum.
Release tabs on the vacuum pads-edges permit instant release.
Including vacuum pads cap.
Capacity: 18 kg per vacuum cup
Suction disc: 120 mm
Caution: When you attach the vacuum cup on the vehicle, we assume no liability.

Order Data:	1EMBRH-KSI2

Ball joint big

This big solid ball joint is used to fix the display at the desired position. A notch allows tiling up to 90 degrees. At the bottom side there is a swivel joint which allows moving the notch and positioning the fixation screw....